MCUXXXR2 Current monitoring relay
OTHER DETAILS AND PRICE FEATURES
- Relequick’s current monitoring relay, especially designed for current monitoring on AC circuits and DC circuits.
- Up to 14 different functions: overcurrent, undercurrent, window… programming via software mode or 1-function overcurrent with trimmers (Manual mode).
- It provides protection of mechanical devices from jam-up or other overloading conditions that result in measurable increase in motor current.
- It compares the set intensity value to the real intensity supported by the circuit, activating the alarms and outputs of the relevant relays in order to protect the system against over and undercurrent between 0.5 to 10 A (250 V).
- MCUs must have a external current transformer attached if current is 10A or above for accurate monitoring.
- Direct mounting on 35 mm rail.
ATTACHED DOCUMENTS
Download installation guide: hoja instalador mcu Complete documentation: complete documentation mcu Technical specifications
| Two time ranges | 0.1s – 30 s (Manual mode) 0.1s – 999h (Software mode) |
| LED indicator | PWR: indication of supply voltage (Green LED) ALM: current detection (Red LED) |
Terminal | Niquel estañado |
Circuito de medición | 10 AAC |
Tiempo de detección de corriente | 5 µs |
Max. current detection | 10 A (200 A with transformer) |
Min. current detection | 0.5 A (20 A with transformador) |
Phase detection | 1-phase |
Input circuit
Power supply | 12 – 24 VAC/VDC 110 – 230 VAC/VDC |
Operating frequency (AC) | 50/60Hz |
Output circuit
| Contact configuration | 2xSPST( relé 1 NO, relé 2 NC) |
Max. switching voltage | 250 VAC1 / 30 VDC1 |
| Max. peak current | 6A |
Current setting
The module can be used in two different ways:
Manual mode: configure the function 0 only using the trimmer.
Programming mode: with our “Devices Programmer” software* it is possible to program easily over/under/window current functions, from 0.5 to 10 A.
*Availabe for Windows XP, 7 and 8.
